Wireless Home Intercom System

Wireless home intercom system variety, the latest fad, provides seamless audio communication link between the console and 4-5 linked console stations in addition to connecting 1-2 remote

doorbell units of intercom. They make use of digital signal frequency to communicate between them and a unique feature called as home house code provides security in a way that is impregnable for nearby phones to connect to them. With video intercom systems you can not only hear but also see what is going on in other parts of your home.

Types of Home Intercom Systems

Latest types of gadgets are fit to be future home systems intercom and there are multiple choices for one to buy. Some of them are discussed here.

1. Video Intercom System

Video intercom systems are generally made use of for front door bells. The video monitor is about 2 ½” X 2” and available in both black and white and color. There is an additional set of ports built in the console to connect the intercom with 2-3 more monitors.

2. Wireless Intercom Systems

A wireless intercom home system provides for transmitting up to 1000 feet between the connected units. They can also be (some makes only) used as paging devices to broadcast to all stations but talk to each one privately. Some of the makes facilitate choice of multiple frequencies too.

Purpose of Intercom System

Plainly speaking, an intercom system is used for simplifying internal communication between rooms. Can you imagine how you would have had to communicate with your daughter staying in the up-stair room? Enter wireless home intercom system; you can luxuriously carry that to practically anywhere within and out of the home as long as the connectivity range permits you.

Monitoring your children is another of the purposes of intercom. Naughty and troublesome children can be monitored throughout lest they commit any problem. With the monitors and chimes you can almost monitor them if not control them.

The Wiring Configurations of Home Intercom System

Home intercom system installation is done by configuring wiring as per needs and in case of wireless, it is the connectivity range calculation

Hard Wired Design

Basically you have 3 types of configurations available. Each one has its own strengths and weaknesses.

1. Daisy System

A very common configuration, this has a single common set of wire from the PSTN connected to all telephones. Wiremen tend to lay this unless asked for other fashion. The drawback is that it can handle only a single traffic at a time.

2. Star Connection

Here all telephones send a pair of wires each to the central hub called as punch-down box. Sometimes a path panel is also used in its place and both of them allow connectivity of external lines, switch board etc.

3. LAN Connection

Used normally in a commercial context and facilitates both computer networking as well as intercom. Here you will have to run 2 sets of cables in parallel, one for voice and the other for high speed data transfer through Ethernet service.

Wireless Intercom Home System

Now you can enjoy the comforts of wireless 3 channel intercom over two stations at home. They don’t require new wiring at all but can do with existing AC wiring itself. It is as easy as plugging in and using.

Continue to : Factors to Note Before Buying Home Phone Intercom System

Home Security System – Should You Install One?
Network Security Cameras – A Look at the Pros and Cons
Make Your Life Safer With Home Security Camera System
Wireless Home Security System – Is It Good Enough To Catch Intruders?
Driveway Alarms – Don’t Wait For The Burglar To Break Into Your House

Book mark this page Email this to your friend Add this page to del.icio.us