How To Select and Install Motion Sensor Lighting

There are two types of sensors designed to detect motion in a home. A passive infrared sensor (PIR) and a dual-technology sensor are the two types of motion sensor commonly used in many of the homes. The cost of these motion sensors is comfortably less. Choose a motion sensor according to your budget and purpose. These are some steps to consider in selecting and installing:

• Survey your home and determine where you want to install a motion sensor.
• Then choose areas where an intruder is likely to go. Common locations are in a hallway or stairway.
• Remember that a passive infrared motion sensor detects heat.
• Heat vents, radiators, open windows where sunlight shines through, or windows where car headlights often shine through at night are some of the areas you must avoid for fixing the motion sensors.
• Select either a hard-wired or wireless motion sensor, which will depend on whether you have a hard-wired or wireless security system.
• Drill holes in walls and route wires in and out of walls to the control panel if you have a hard-wired system.
• Access a power source for a wireless motion sensor. Some infrared and dual technology motion sensors, however, come with a lithium battery that supplies power.
• Mount the sensor to a wall using the drill and screws. Remember to aim a passive infrared motion sensor away from a heat source

Benefits of Motion Sensors

Motion sensors are ideal for home security and home automation. How to build a Motion sensor lighting for example is a great way to save energy by switching off lights in rooms that are not used. It also ensures safety by switching on the lights when it ‘senses’ any intrusion on your front yard or near the door.

Motion sensors thus are growing in popularity. While there is no need to go in for complex and very expensive motion sensors, you could certainly choose driveway motor sensor to automate your normal routine of pulling in and out of the garage, locking and unlocking of doors and gates and so on. You can also afford motion sensor lighting, which in the long run results in energy savings. These sensors could be easily mounted or installed, there are no minimum load requirements, they come with built in surge protection and generally ideal for any home owner who consider safety and convenience as top priority.

So go in for latest wireless motion sensors and other motion sensors that we discussed and make your home a ‘smart’ and secure home today!

Related Article

How To Choose The Right Sensor For Your Home Security System?
Top Ten Home Security Devices That Are Worth Considering
You Simply Cannot Do Without Magnetic Switches If You Really Want To Be Secure

Book mark this page Email this to your friend Add this page to del.icio.us